Download Free 70-741 Study Guide With Updated Exam Questions – (March-2018 dumps)

Our Microsoft MCSA: Windows Server 2016 70-741 exam practice software continuously assesses your knowledge and determines when you are ready to pass your Microsoft 70-741 exam. Our ITsecurityexams’s Networking with Windows Server 2016 Microsoft 70-741 exam dumps material can assess if there is a gap between your knowledg. We at ITsecurityexams present you latest Microsoft 70-741 exam questions with a focused training module that gets you to pass the 70-741 certification Exam.

♥ VALID 70-741 Exam Questions 2018 ♥

70-741 exam questions, 70-741 PDF dumps; 70-741 exam dumps:: https://www.dumpsschool.com/70-741-exam-dumps.html (125 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest Microsoft 70-741 Dumps Exam Questions and Answers:

Version: 11.0
Question: 21

You have a DHCP server named Server1 that runs Windows Server 2016.
You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?

A. Create a second scope, and then create a superscope.
B. Create a superscope, and then configure an exclusion range in Scope1.
C. Create a new scope, and then modify the IPv4 bindings.
D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.

Answer: A

Question: 22

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?

A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
B. From Windows PowerShell on Server1, run the Set-VmNetworkAdapter cmdlet.
C. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.
D. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet

Answer: A

Question: 23

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You activate the scope.
Does this meet the goal?

A. Yes
B. No

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question: 24

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Repair-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B

Explanation:
https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question: 25

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Reconcile-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B

Explanation:
https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question: 26

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Set-DhcpServerv4Scope cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: A

Explanation:
https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

New Updated 70-741 Exam Questions 70-741 PDF dumps 70-741 practice exam dumps: https://www.dumpsschool.com/70-741-exam-dumps.html

         

Facebook Comments